Mylinking™ Network Tap ML-TAP-1201B

4*GE 10/100/1000M BASE-T plus 8*GE SFP, Max 12Gbps, Bypass

Short Description:

Mylinking™ Network Tap of ML-TAP-1201B has up to 12Gbps processing capacity. It could be deployed as optical splitting, mirroring span access or 2 electrical links inline bypass series. Supports maximum 4 * GE SFP slots and 8 * GE electrical ports; It’s ASIC dedicated chip pure hardware design, high-speed backplane switching bus bandwidth up to 16Gbps; TCAM hardware policy matching mark engine module can fully realize multi-port traffic aggregation, traffic filtering, traffic splitting, protocol analysis, packet depth analysis and load balancing after data collection at gigabit line speed. It provide you a convenient and efficient data collection solution.


Product Detail

Product Tags

1- Overviews

  • A full Network Visibility control for packet capture device(4 * GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports)
  • A full duplex line speed network traffic free forwarding ability plus scheduling management (duplex Rx/Tx processing)
  • A full pre processing and re-distribution network tap device(bidirectional bandwidth 12Gbps)
  • Supported Link-Reflect and Link-SafeSwitch enable redundant equipment and routing mechanism, achieve fast traffic switching, effectively shorten network failure recovery time, and enhance network reliability to keep up/down Ethernet Port Link status without lost.
  • Supported network traffic raw packet collected, identified, analyzed, statistically summarized and marked
  • Supported traffic capture for 1G copper Ethernet and 1G single multi-mode optical Ethernet links in inline serial deployment, SPAN port mirroring and two collection modes can be mixed
  • Supported packet filtering matching such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN packet characteristics, Ethernet type fields and values, IP protocol number, TOS and up to 2K filtering rules. Supports IP fragment analysis
product-description1

ML-TAP-1201B

2- System Block Diagram

product-description2

3- Operating Principle

product-description3

4- Intelligent Traffic Processing Abilities

product description

ASIC Chip Plus TCAM CPU
12Gbps intelligent traffic processing capabilities

product-description1

GE Ethernet or SFP port Traffic Capture 
4*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, Rx/Tx duplex processing, up to 12Gbps Traffic Data processing at same time, for network traffic acquisition, simple pre-processing

product description (2)

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

product description (3)

Data Aggregation 
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

product description (4)

Data Distribution 
Classified the incoming network traffic metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules.

product description (5)

Smart Data Filtering
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.

product description

Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

product description (6)

UDF Match
Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration

product-description2

Smart BYPASS Function
Supported Link-Reflect and Link-SafeSwitch enable redundant equipment and routing mechanism, achieve fast traffic switching, effectively shorten network failure recovery time, and enhance network reliability to keep up/down of Ethernet Port Link status without packet lose.

product description (15)

Unified Control Platform
Supported mylinking™ Visibility Control Platform Access

product description (16)

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System Design

5- Mylinking™ Network Tap Typical Application Structures

5.1 Mylinking™ Network Tap Smart BYPASS Function: Link-Reflect & Link-SafeSwitch

product-description4

5.2 Mylinking™ Network Tap Inline Bypass Deployment Application

product-description5

5.3 Mylinking™ Network Tap Hybrid Access Application

product-description6

5.4 Mylinking™ Network Tap Customization Traffic Monitoring Application

product-description7

6- Specifications

Mylinking™ Network Tap NPB/TAP Functional Parameters

Network Interface GE Electrical Ports

4 ports*10/100/1000M BASE-T

SFP Slots

8*GE SFP ports, support GE Optical/Electrical Module

Deployment mode Inline mode

support max 2 routes/links *10/100/1000M BASE-T inline mode

SPAN monitoring input

support max 11*SPAN inputs

Monitoring Output

support max 11*monitoring outputs

Functions

Total QTYs interface

12 ports

Line speed process capability

12Gbps

Traffic replication / aggregation / distribution / forwarding / Filtering

Supported

In-line mode and SPAN monitoring

Supported

Up/Down Traffic Aggregation

Supported

Up/Down Traffic Monitoring

Supported

Distribution based on traffic identification

Supported

Distribution and Filtering based on IP / protocol / port Five tuple traffic identification

Supported

Optical interface single fiber transmission

Supported

Support Ethernet encapsulation independence

Supported

BYPASS Function(Inline mode)

Supported

BYPASS switch time(Inline mode)

< 50ms

Network Side Delay

< 100ns

LinkReflect(Inline mode)

Supported

No Flash Break when Power ON/OFF

Supported

CONSOLE Network Management

Supported

IP/WEB Network Management

Supported

SNMP V1/V2C Network Management

Supported

TELNET/SSH Network Management

Supported

SYSLOG Protocol

Supported

User authentication function Password authentication based on user name

Electric(1+1 Redundant Power System-RPS)

Rated supply voltage

AC110-240V/DC-48V (Optional)

Rated power frequency

50HZ

Rated input current

AC-3A / DC-10A

Rated power function

100W

Environment

Operating Temperature

0-50℃

Storage Temperature

-20-70℃

Operating Humidity

10%-95%, Non-condensing

User Configuration

Console Configuration

RS232 interface,9600,8,N,1

Password authentication

support

Rack Height

Rack space (U)

1U 485mm*44.5mm*350mm

7- Order Information

ML-TAP-1201B mylinking™ Network Tap @
4*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 12Gbps

ML-TAP-1601B mylinking™ Network Tap @
8*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 16Gbps

ML-TAP-2401B mylinking™ Network Tap @
16*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 24Gbps

Mylinking™ Network Tap NPB/TAP Typical Application

Data Center for Network Monitoring and Security as Following Areas:

Telecom, Broadcasting, Government, Finance, Energy, Power, Petroleum, Hospital, School, Enterprise And Other Industries


  • Previous:
  • Next:

  • Write your message here and send it to us