Mylinking™ Network Tap ML-TAP-1601B

8GE 10/100/1000M BASE-T plus 8GE SFP, Max 16Gbps, Bypass

Short Description:

Mylinking™ Network Tap of ML-TAP-1601B has up to 16Gbps processing capacity. It could be deployed as optical splitting, mirroring span access or 4 electrical links inline bypass series. Supports maximum 8 * GE SFP slots and 8 * GE electrical ports; SFP slot flexibly supports Gigabit single/multi-mode optical modules and Gigabit electrical modules. Supports LAN mode; Supports packet filtering and forwarding based on the source port, quintuple standard protocol domain, source/destination MAC address, IP fragment Flag, transport layer port range, Ethernet type field, VLANID, MPLS label, and TCP Flag.

Send email to us

Product Detail

Product Tags

1- Overviews

A full visual control of Data Acquisition device(8 * GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports)
A full Data Scheduling Management device(duplex Rx/Tx processing)
A full pre-processing and re-distribution device(bidirectional bandwidth 16Gbps)
Supported collection & reception of link data from different network element locations
Supported collection & reception of link data from different switch routing nodes
Supported raw packet collected, identified, analyzed, statistically summarized and marked
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.
Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
Supported real-time packet capture analysis, data source identification

ML-TAP-1601B

2- System Block Diagram

3- Operating Principle

4- Intelligent Traffic Processing Abilities

ASIC Chip Plus TCAM CPU
16Gbps intelligent traffic processing capabilities

GE Network Traffic Capture
8*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, Rx/Tx duplex processing, up to 16Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing

Data Replication
The network packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Aggregation
The network packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Distribution
Classified the incoming network traffic metdata accurately and discarded or forwarded different data services to multiple interface outputs based on user’s predefined rules.

Data Filtering
Supporting L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.

Loading Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

UDF User Defined Function Match
Supported the User Defined Function to match any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration

Smart BYPASS Function
Supported Link-Reflect and Link-SafeSwitch to enable redundant equipment and routing mechanism, achieve fast network traffic switching, effectively shorten network failure recovery time, and enhance network reliability to keep up/down Ethernet Port Link status without lost.

Unified Control Platform
Supported mylinking™ Visibility Control Platform to Manage

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power Supply System

5- Mylinking™ Network Tap Typical Application Structures

5.1 Mylinking™ Network Tap Smart BYPASS Function: Link-Reflect & Link-SafeSwitch(as following)

5.2 Mylinking™ Network Tap Inline Bypass Deployment Application(as following)

5.3 Mylinking™ Network Tap Hybrid Access Application(as following)

5.4 Mylinking™ Network Tap Customization Traffic Monitoring Application(as following)

6- Specifications

Mylinking™ Network Tap NPB/TAP Functional Parameters
Network Interface	GE Electrical Ports	8 ports*10/100/1000M BASE-T
Network Interface	SFP Slots	8*GE SFP ports, support GE Optical/Electrical Module
Deployment mode	Inline mode	support max 4 routes/links *10/100/1000M BASE-T inline mode
	SPAN monitoring input	support max 15*SPAN inputs
	Monitoring Output	support max 15*monitoring outputs
Functions	Total QTYs interface	16 ports
	Line speed process capability	16Gbps
	Traffic replication / aggregation / distribution / forwarding / Filtering	Supported
	Inline mode and SPAN monitoring	Supported
	Up/Down Traffic Aggregation	Supported
	Up/Down Traffic Monitoring	Supported
	Distribution based on traffic identification	Supported
	Distribution and Filtering based on IP / protocol / port Five tuple traffic identification	Supported
	Optical interface single fiber transmission	Supported
	Support Ethernet encapsulation independence	Supported
	BYPASS Function(Inline mode)	Supported
	BYPASS switch time(Inline mode)	< 50ms
	Network Side Delay	< 100ns
	LinkReflect(Inline mode)	Supported
	No Flash Break when Power ON/OFF	Supported
	CONSOLE Network Management	Supported
	IP/WEB Network Management	Supported
	SNMP V1/V2C Network Management	Supported
	TELNET/SSH Network Management	Supported
	SYSLOG Protocol	Supported
	User authentication function	Password authentication based on user name
Electric(1+1 Redundant Power System-RPS)	Rated supply voltage	AC110-240V/DC-48V (Optional)
	Rated power frequency	50HZ
	Rated input current	AC-3A / DC-10A
	Rated power function	100W
Environments	Operating Temperature	0－50℃
	Storage Temperature	-20-70℃
	Operating Humidity	10%-95%, Non-condensing
User Configuration	Console Configuration	RS232 interface,9600,8,N,1
User Configuration	Password authentication	support
Rack Height	Rack space (U)	1U 485mm44.5mm350mm