China Supplier Hash Network Tap - Mylinking™ Network Tap ML-TAP-2401B – Mylinking
China Supplier Hash Network Tap - Mylinking™ Network Tap ML-TAP-2401B – Mylinking Detail:
1- Overviews
- A full visual network triffc capture device with 16 * GE 10/100/1000M BASE-T ports, and 8*GE SFP slots
- A full Data Scheduling Management device(duplex Rx/Tx processing)
- A full pre-processing and re-distribution device(bidirectional bandwidth 24Gbps)
- Supported capture & receive the link data from different network element locations
- Supported collection & reception of link data from different switch routing nodes
- Supported raw packet capture, identifie, analysis, statistically summarize and mark
- Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packet protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
- Supported raw packet forwarding for monitoring like BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other network traffic request
- Supported real-time packet capture analysis, data source identification, etc.
ML-TAP-2401B
Mylinking™ brand new Network Traffic Replication Aggregator Tap is freely directed outputs such as traffic acquisition, traffic aggregation, traffic shunting and load balancing for Gigabit Ethernet links. This network tap aggregator built in flow engine to strategic orientation, while traditional TAP network flow capture complete, all can be inline concatenated and SPAN port traffic deployment. Based on flexible control strategy oriented network packet diversion, replication, or aggregation, it can accurately forward the right traffic types, to meet all kinds of network security equipment, protocol analysis, and signal analysis, such as network traffic monitoring or security deployment requirements.
2- System Block Diagram
3- Operating Principle
4- Intelligent Traffic Processing Abilities
6- Specifications
Mylinking™ Network Tap NPB/TAP Functional Parameters |
||
Network Interface | GE Electrical Ports |
16 ports*10/100/1000M BASE-T |
SFP Slots |
8*GE SFP ports, support GE Optical/Electrical Module |
|
Deployment mode | Inline mode |
support max 8 routes/links *10/100/1000M BASE-T inline mode |
SPAN monitoring input |
support max 23*SPAN inputs |
|
Monitoring Output |
support max 23*monitoring outputs |
|
Functions |
Total QTYs interface |
24 ports |
Line speed process capability |
24Gbps |
|
Traffic replication / aggregation / distribution / forwarding / Filtering |
Supported |
|
In-line mode and SPAN monitoring |
Supported |
|
Up/Down Traffic Aggregation |
Supported |
|
Up/Down Traffic Monitoring |
Supported |
|
Distribution based on traffic identification |
Supported |
|
Distribution and Filtering based on IP / protocol / port Five tuple traffic identification |
Supported |
|
Optical interface single fiber transmission |
Supported |
|
Support Ethernet encapsulation independence |
Supported |
|
BYPASS Function(Inline mode) |
Supported |
|
BYPASS switch time(Inline mode) |
< 50ms |
|
Network Side Delay |
< 100ns |
|
LinkReflect(Inline mode) |
Supported |
|
No Flash Break when Power ON/OFF |
Supported |
|
CONSOLE Network Management |
Supported |
|
IP/WEB Network Management |
Supported |
|
SNMP V1/V2C Network Management |
Supported |
|
TELNET/SSH Network Management |
Supported |
|
SYSLOG Protocol |
Supported |
|
User authentication function | Password authentication based on user name | |
Electric(1+1 Redundant Power System-RPS) |
Rated supply voltage |
AC110-240V/DC-48V (Optional) |
Rated power frequency |
50HZ |
|
Rated input current |
AC-3A / DC-10A |
|
Rated power function |
100W |
|
Environment |
Operating Temperature |
0-50℃ |
Storage Temperature |
-20-70℃ |
|
Operating Humidity |
10%-95%, Non-condensing |
|
User Configuration |
Console Configuration |
RS232 interface,9600,8,N,1 |
Password authentication |
support |
|
Rack Height |
Rack space (U) |
1U 485mm*44.5mm*350mm |
7- Order Information
ML-TAP-1201B mylinking™ Network Tap @
4*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 12Gbps
ML-TAP-1601B mylinking™ Network Tap @
8*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 16Gbps
ML-TAP-2401B mylinking™ Network Tap @
16*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 24Gbps
FYR: Network Traffic Data Information Insights Management
1- For Data Source
•Acquisition: SPAN/Splitter
•Related Position: XX Switch, XX Internet Link, XX Rack Position
•Related Network Topology
2- For Data Content Classify
•Business Object View, Business/Service Binding
•Data Classification Policy bind to Business Object
•Data Control Strategy Overview
•Data Slice
•Data Deduplication
•Data Masking
3- For Data Content Outgoing
•For traffic output device info management-IDS/Audit/NPM/APM
•Cover target device location information management (XX Machine Room/Rack Position/Output Point)
4- For Overall Status
•Input/Output/Internet Link Traffic Status Unified Monitoring
•Large modular screen to display traffic data information(Acquisition Point/Output point Traffic Trend, Packet Length & Type Distribution)
•Integrated traffic situation monitoring
Product detail pictures:
Related Product Guide:
Our mission is to become an innovative supplier of high-tech digital and communication devices by providing value added design, world-class manufacturing, and service capabilities for China Supplier Hash Network Tap - Mylinking™ Network Tap ML-TAP-2401B – Mylinking , The product will supply to all over the world, such as: Naples , USA , Lisbon , Our Company has professional engineers and technical staff to answer your questions about maintenance problems, some common failure. Our product quality assurance, price concessions, any questions about the products, Please feel free to contact us.
By Grace from Mauritius - 2018.11.06 10:04
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Janet from South Africa - 2017.10.23 10:29