China Supplier Port Mirroring Vs Network Tap - Mylinking™ Network Tap ML-TAP-2401 – Mylinking
China Supplier Port Mirroring Vs Network Tap - Mylinking™ Network Tap ML-TAP-2401 – Mylinking Detail:
1- Overviews
- A full visual control of Data Acquisition device(24*GE SFP slots)
- A full Data Scheduling Management device(duplex Rx/Tx processing)
- A full pre-processing and re-distribution device(bidirectional bandwidth 24Gbps)
- Supported collection & reception of link data from different network element locations
- Supported collection & reception of link data from different switch routing nodes
- Supported raw packet collected, identified, analyzed, statistically summarized and marked
- Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
- Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
ML-TAP-2401
2- System Block Diagram
3- Operating Principle
4- Intelligent Traffic Processing Abilities
6- Specifications
|
Mylinking™ Network Tap NPB/TAP Functional Parameters |
||
| Network Interface | GE ports |
24*GE SFP slots |
| 10GE ports |
- |
|
| Deployment mode | SPAN monitoring input |
support |
| In-line mode |
support |
|
| Total QTYs interface |
24 |
|
| Traffic replication / aggregation / distribution |
support |
|
| Link QTYs supporting Mirror replication / aggregation |
1 -> N link traffic replication (N <24) N-> 1 link traffic aggregation (N <24) G Group(M-> N Link) traffic replication and aggregation [G * (M + N) <24] |
|
|
Functions |
Distribution based on traffic identification |
support |
| Distribution based on IP / protocol / port Five tuple traffic identification |
support |
|
| Distribution strategy based on protocol header the key labeled traffic identifies |
support |
|
| Strategic distribution based on deep message content identification |
support |
|
| Support Ethernet encapsulation independence |
support |
|
| CONSOLE Network Management |
support |
|
| IP/WEB Network Management |
support |
|
| SNMP V1/V2C Network Management |
support |
|
| TELNET/SSH Network Management |
support |
|
| SYSLOG Protocol |
support |
|
| User authentication function |
Password authentication based on user name |
|
|
Electric(1+1 Redundant Power System-RPS) |
Rated supply voltage |
AC110-240V/DC-48V [Optional] |
| Rated power frequency |
AC-50HZ |
|
| Rated input current |
AC-3A / DC-10A |
|
| Rated power function |
150W(2401: 100W ) |
|
|
Environment |
Operating Temperature |
0－50℃ |
| Storage Temperature |
-20-70℃ |
|
| Operating Humidity |
10%-95%, Non-condensing |
|
|
User Configuration |
Console Configuration |
RS232 Interface, 9600,8,N,1 |
| Password authentication |
support |
|
|
Rack Height |
Rack space (U) |
1U 460mm*45mm*440mm |
7- Order Information
ML-TAP-2401 mylinking™ Network Tap 24*GE SFP ports
ML-TAP-1410 mylinking™ Network Tap 12*GE SFP ports plus 2*10GE SFP+ ports
ML-TAP-2610 mylinking™ Network Tap 24*GE SFP ports plus 2*10GE SFP+ ports
ML-TAP-2810 mylinking™ Network Tap 24*GE SFP ports plus 4*10GE SFP+ ports
FYR: Comparison of different types of interfaces for adding or stripping VLAN tags
|
HOW EACH TYPE OF INTERFACE HANDLES DATA FRAMES? |
|||
|---|---|---|---|
|
Interface Type |
Rx Message without Tag Process |
Rx Message with Tag Process |
Tx Frame Process |
| Access Interface | Receive the message and type the default VLAN ID |
• Receive the message when the VLAN ID is the same as the default VLAN ID. • discard the text when the VLAN ID is different from the default VLAN ID. |
First strip the PVID Tag of the frame and then send it. |
| Trunk Interface |
• type the default VLAN ID and receive the message when the default VLAN ID is in the list of VLAN ids that are allowed to pass. • type the default VLAN ID and discard the text when the default VLAN ID is not in the list of VLAN ids that are allowed to pass. |
• receive the text when the VLAN ID is in the list of VLAN ids that the interface allows to pass. • discard the text when the VLAN ID is not in the list of VLAN ids that the interface allows to pass through. |
• when the VLAN ID is the same as the default VLAN ID and is the VLAN ID allowed by the interface, remove the Tag and send the message. • when the VLAN ID is different from the default VLAN ID and is the VLAN ID allowed by the interface, keep the original Tag and send the message. |
| Hybrid Interface |
• type the default VLAN ID and receive the message when the default VLAN ID is in the list of VLAN ids that are allowed to pass. • type the default VLAN ID and discard the text when the default VLAN ID is not in the list of VLAN ids that are allowed to pass. |
• receive the text when the VLAN ID is in the list of VLAN ids that the interface allows to pass. • discard the text when the VLAN ID is not in the list of VLAN ids that the interface allows to pass through. |
The message is sent when the VLAN ID is the VLAN ID that the interface allows to pass through. You can use commands to set whether to send with a Tag or not. |
Product detail pictures:
Related Product Guide:
We constantly carry out our spirit of ''Innovation bringing advancement, Highly-quality guaranteeing subsistence, Administration selling advantage, Credit rating attracting buyers for China Supplier Port Mirroring Vs Network Tap - Mylinking™ Network Tap ML-TAP-2401 – Mylinking , The product will supply to all over the world, such as: Jordan , Grenada , Spain , The president and all the company members would like to provide qualified goods and services for customers and sincerely welcome and cooperate with all native and foreign customers for a bright future.
By John biddlestone
from Roman
- 2018.12.11 11:26
The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
By Pag
from Monaco
- 2017.12.19 11:10
