Manufactur standard Ethernet Network Tap - Mylinking™ Network Tap ML-TAP-2401 – Mylinking

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The really abundant projects management experiences and 1 to just one provider model make the high importance of business enterprise communication and our easy understanding of your expectations for Virtual Network Tap , Passive Lan Tap , Virtual Tap , Our products are new and old customers consistent recognition and trust. We welcome new and old customers to contact us for future business relations, common development. Let's speeding in the dark!
Manufactur standard Ethernet Network Tap - Mylinking™ Network Tap ML-TAP-2401 – Mylinking Detail:

1- Overviews

  • A full visual control of Data Acquisition device(24*GE SFP slots)
  • A full Data Scheduling Management device(duplex Rx/Tx processing)
  • A full pre-processing and re-distribution device(bidirectional bandwidth 24Gbps)
  • Supported collection & reception of link data from different network element locations
  • Supported collection & reception of link data from different switch routing nodes
  • Supported raw packet collected, identified, analyzed, statistically summarized and marked
  • Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
  • Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.

product-description1

ML-TAP-2401

2- System Block Diagram

product-description2

3- Operating Principle

product-description3

4- Intelligent Traffic Processing Abilities

6- Specifications

Mylinking™ Network Tap  NPB/TAP Functional Parameters

Network Interface GE ports

24*GE SFP slots

10GE ports

-

Deployment mode SPAN monitoring input

support

In-line mode

support

Total QTYs interface

24

Traffic replication / aggregation / distribution

support

Link QTYs supporting Mirror replication / aggregation

1 -> N link traffic replication (N <24)

N-> 1 link traffic aggregation (N <24)

G Group(M-> N Link) traffic replication and aggregation [G * (M + N) <24]

Functions

Distribution based on traffic identification

support

Distribution based on IP / protocol / port Five tuple traffic identification

support

Distribution strategy based on protocol header the key labeled traffic identifies

support

Strategic distribution based on deep message content identification

support

Support Ethernet encapsulation independence

support

CONSOLE Network Management

support

IP/WEB Network Management

support

SNMP V1/V2C Network Management

support

TELNET/SSH Network Management

support

SYSLOG Protocol

support

User authentication function

Password authentication based on user name

Electric(1+1 Redundant Power System-RPS)

Rated supply voltage

AC110-240V/DC-48V [Optional]

Rated power frequency

AC-50HZ

Rated input current

AC-3A / DC-10A

Rated power function

150W(2401: 100W )

Environment

Operating Temperature

0-50℃

Storage Temperature

-20-70℃

Operating Humidity

10%-95%, Non-condensing

User Configuration

Console Configuration

RS232 Interface, 9600,8,N,1

Password authentication

support

Rack Height

Rack space (U)

1U 460mm*45mm*440mm

7- Order Information

ML-TAP-2401 mylinking™ Network Tap 24*GE SFP ports
ML-TAP-1410 mylinking™ Network Tap 12*GE SFP ports plus 2*10GE SFP+ ports
ML-TAP-2610 mylinking™ Network Tap 24*GE SFP ports plus 2*10GE SFP+ ports
ML-TAP-2810 mylinking™ Network Tap 24*GE SFP ports plus 4*10GE SFP+ ports

FYR: Comparison of different types of interfaces for adding or stripping VLAN tags

HOW EACH TYPE OF INTERFACE HANDLES DATA FRAMES?

Interface Type

Rx Message without Tag Process

Rx Message with Tag Process

Tx Frame Process
Access Interface Receive the message and type the default VLAN ID

• Receive the message when the VLAN ID is the same as the default VLAN ID.

• discard the text when the VLAN ID is different from the default VLAN ID.

First strip the PVID Tag of the frame and then send it.
Trunk Interface

• type the default VLAN ID and receive the message when the default VLAN ID is in the list of VLAN ids that are allowed to pass.

• type the default VLAN ID and discard the text when the default VLAN ID is not in the list of VLAN ids that are allowed to pass.

• receive the text when the VLAN ID is in the list of VLAN ids that the interface allows to pass.

• discard the text when the VLAN ID is not in the list of VLAN ids that the interface allows to pass through.

• when the VLAN ID is the same as the default VLAN ID and is the VLAN ID allowed by the interface, remove the Tag and send the message.

• when the VLAN ID is different from the default VLAN ID and is the VLAN ID allowed by the interface, keep the original Tag and send the message.

Hybrid Interface

• type the default VLAN ID and receive the message when the default VLAN ID is in the list of VLAN ids that are allowed to pass.

• type the default VLAN ID and discard the text when the default VLAN ID is not in the list of VLAN ids that are allowed to pass.

• receive the text when the VLAN ID is in the list of VLAN ids that the interface allows to pass.

• discard the text when the VLAN ID is not in the list of VLAN ids that the interface allows to pass through.

The message is sent when the VLAN ID is the VLAN ID that the interface allows to pass through. You can use commands to set whether to send with a Tag or not.

Product detail pictures:

Manufactur standard  Ethernet Network Tap  -
 Mylinking™ Network Tap ML-TAP-2401 – Mylinking detail pictures

Manufactur standard  Ethernet Network Tap  -
 Mylinking™ Network Tap ML-TAP-2401 – Mylinking detail pictures


Related Product Guide:

We goal to understand excellent disfigurement from the manufacturing and supply the top support to domestic and abroad clients wholeheartedly for Manufactur standard Ethernet Network Tap - Mylinking™ Network Tap ML-TAP-2401 – Mylinking , The product will supply to all over the world, such as: Algeria , Niger , Oman , We accomplish this by exporting our wigs directly from our own factory to you. The goal of our company is to get customers who enjoy coming back to their business. We sincerely hope to cooperate with you in the near future. If there's any opportunity, welcome to visit our factory!!!
  • This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
    5 Stars By Phoebe from Romania - 2017.05.02 11:33
    The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
    5 Stars By Odelia from Serbia - 2018.06.26 19:27
    Write your message here and send it to us