Mylinking™ Network Packet Broker(NPB) ML-NPB-3440L

1610/100/1000M RJ45, 161/10GE SFP+, 140G QSFP and 140G/100G QSFP28, Max 320Gbps

Short Description:

Mylinking™ Network Packet Broker of ML-NPB-3440L, supports 16*10/100/1000M RJ45 Ethernet copper ports, 16*1/10GE SFP+ ports, 1*40G QSFP ports and 1*40G/100G QSFP28 port; Support L2-L7 Protocol Filtering function; Supports flexible Packet Encapsulation; Supports matching function of inner/outer tunnel; Inner/out layer Tunnel Protocol identify: VxLAN, GRE, ERSPAN, MPLS, IPinIP, GTP, etc. Supports GTP/GRE/VxLAN Tunnel Packet Stripping; Supports WEB Graphical Interface Configuration; 320Gbps traffic processing capability; The above characteristics guarantee the linear speed processing performance.

And ML-NPB-3440L Network Packet Broker is based on Domestic Chip Solution, the whole process of Data Capturing Visibility, Data Unified Scheduling Management, Preprocessing and Redistribution of comprehensive products. It can realize the centralized collection and reception of link data of different network element locations and different exchange routing nodes. Through the built-in high-performance data analysis and processing engine of the device, the captured original data is accurately identified, analyzed, statistically summarized and labeled, and the original data is distributed and output. Further meet all kinds of analysis and monitoring equipment for Data Mining, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Control and other required traffic.

Send email to us

Product Detail

Product Tags

1-Overviews

●A full Data Capturing Visibility device(16*10/100/1000M RJ45, 16*1/10GE SFP+, 1*40G QSFP and 1*40G/100G QSFP28 ports)
●A full Data Scheduling Management device(320Gbps duplex Rx/Tx processing)
●A full pre-processing and re-distribution device(bidirectional bandwidth 320Gbps)
●Supported traffic capturing & reception of link data from different network element locations
●Supported traffic capturing & reception of link data from different switch routing nodes
●Supported raw packet collected, identified, analyzed, statistically summarized and marked
●Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
●Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
●Supported real-time packet capture analysis, data source identification

2-Intelligent Traffic Processing Abilities

Pure Chinese Chip Plus Multicore CPU

320Gbps intelligent traffic processing capabilities

100GE Data Capturing
16*10/100/1000M RJ45, 16*1/10GE SFP+, 1*40G QSFP and 1*40G/100G QSFP28 ports Rx/Tx duplex processing, up to 320bps Traffic Data Transceiver at same time, for network Data Capturing, simple Pre-processing

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Distribution
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to white list, blacklist or user’s predefined rules.

Data Filtering
Input data traffic can be accurately classified, and different data services can be discarded or forwarded to the output of multiple interfaces by whitelist or blacklist rules. Flexible combination of elements such as Ethernet Type, VLAN tag, TTL, IP seven-tuple, IP fragmentation, TCP flag identification, message characteristics, etc. to meet the deployment requirements of various network security equipment, protocol analysis, signaling analysis, traffic monitoring and so on

Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

VLAN Tagged

VLAN Untagged

VLAN Replaced

Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.

Single Fiber Transmission
Support single-fiber transmission at port rates of 10 G, 40 G, and 100 G to meet the single-fiber data receiving requirements of some back-end devices and reduce the input cost of fiber auxiliary materials when a large number of links need to be captured and distributed

100G & 40G Port Breakout
Support for breakout on 100G or 40G ports with 4*25GE or 4*10GE ports for specific access needs

Data Slicing
Supported policy-based slicing (64-1518 bytes optional) of the raw data, and the traffic output policy can be implemented based on user configuration

Tunneling Protocol Identify
Supported automatically identify various tunneling protocols such as: VxLAN、GRE、ERSPAN、MPLS、IPinIP、GTP, etc. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel

Tunnel Packet Termination
Supported tunnel packet termination function, which can configure ip address/mask on the traffic input port, and directly send the traffic that needs to be collected in the user's network to the device acquisition port through tunnel encapsulation methods such as GRE, GTP, VXLAN and so on.

Time Stamping
Supported to synchronize the NTP server to correct the time and write the message into the packet in the form of a relative time tag with a timestamp mark at the end of the frame, with the accuracy of nanoseconds

Packet Capturing
Supported port-level, policy-level packet capture from source physical ports within filter of Five-Tuple field in real time

Traffic Visibility
Supported the whole process of link data flow visibility from receiving and capturting, identification and processing, scheduling and management, output distribution can be realized. Through a friendly interactive interface, the invisible data signal is transformed into a visible, manageable and controllable entity by multi-vision and multi-latitude presentation of traffic composition structure, network traffic distribution, packet identification processing state, various traffic trends, and the relationship between traffic and time or business.

VxLAN, VLAN, MPLS, GTP, GRE Header Stripping
Supported the VxLAN, VLAN, MPLS, GTP, GRE header stripping to forward in the original data packet

Packet Encapsulation Output
Supported the captured traffic can be output after outer encapsulation. This function can output any specified packet in the captured traffic to the back-end system or network switch after ERSPAN encapsulation header.

Packet Forwarding Priority
Supported the definition of priority of data packets according to the importance of the service at the incoming port, and the high-priority packets are forwarded preferentially at the output. After the high-priority packets are forwarded, other medium-and low-priority packets are forwarded. Avoid analysis system alarm caused by missing important data packets.

Output Port Redundancy
Supported the primary and secondary redundancy function of traffic output port, which can switch the output traffic to the secondary port when the state of the primary output port is abnormal (close /link down), so as to ensure the high reliability of traffic output.

Mylinking™ Network Visibility Platform
Supported Mylinking™ Matrix-SDN Visibility Control Platform Access

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

3-Mylinking™ Network Packet Broker Typical Application Structures

3.1 Mylinking™ Network Packet Broker Centralized Collection Replication/Aggregation Application(as following)

3.2 Mylinking™ Network Packet Broker Unified Schedule Application(as following)

3.3 Mylinking™ Network Packet Broker Data Slicing Application(as following)

3.4 Mylinking™ Network Packet Broker Data VLAN Tagged Application(as following)

4-Specifications

Mylinking™ Network Packet Broker TAP/NPB Functional Parameters
Network Interface		10/100/1000M RJ45 Ethernet	16 RJ45 ports
		1/10G SFP+	16 SFP+ slots
		40G QSFP	1 QSFP slot
		100G QSFP28 (compatible with 40G)	1 QSFP28 slot
		Out-of-band manage interface	1*10/100/1000M copper
Deploy Mode		Fiber Tap	Support
Deploy Mode		Mirror Span	Support
System Function	Traffic Processing	Traffic Replicating/Aggregating/Distribution	Support
		Load-Balancing	Support
		Filter based on IP/Protocol/Port Quintuple Traffic Identification	Support
		VLAN tag/untagged/replace	Support
		Tunnel Packet Termination	Support
		Time Stamping	Support
		Packet Header Stripping	VxLAN, VLAN, MPLS, GRE, GTP, etc.
		Packet Encapsulation Output	Support
		Data Slicing	Support
		Tunnel Protocol Identification	Support
		Tunnel Packet Termination	Support
		Output Port Redundancy	Support
		Single Fiber Transmission	Support
		Ethernet Package Independence	Support
		Port Breakout	Support
		Packet Forwarding Priority	Support
		Processing ability	320Gbps
	Management	CONSOLE MGT	Support
		IP/WEB MGT	Support
		SNMP MGT	Support
		TELNET/SSH MGT	Support
		SYSLOG Protocol	Support
		RADIUS or Tacacs+ Centralized Authorization	Support
		User Authentication	Authentication based on username and password
Electrical (1+1 Redundant Power System-RPS)		Rated Power Supply Voltage	AC110~240V/DC-48V[Optional]
		Rated Power Frequency	AC-50HZ
		Rated Input Current	AC-3A / DC-10A
		Rated Function Power	Max 200W
Environment		Operating Temperature	0－50℃
		Storage Temperature	-20-70℃
		Working Humidity	10%-95%, No Condensation
User Configuration		Console Configuration	RS232 interface,115200,8,N,1
User Configuration		Password Authentication	Support
Chassis Height		Rack Space (U)	1U 445mm505mm44mm

Previous: Mylinking™ Network Packet Broker(NPB) ML-NPB-3210L

Next:

Write your message here and send it to us