Network Packet Broker(NPB) ML-NPB-5410+ 2D

Mylinking™ Network Packet Broker(NPB) ML-NPB-5410+

640/100GE QSFP28 plus 481/10/25GE SFP+, Max 1.8Tbps

Short Description:

6*100G/40G QSFP28 slots plus 48*1G/10G/25G SFP+ slots total 54 ports; 1*10/100/1000M adaptive MGT management interface; 1*RS232C RJ45 CONSOLE port; Supports Ethernet network packet replication, aggregation, and distribution. Packet filtering and traffic guidance based on rules (seven-tuple and the first 128-byte feature field of packets); the maximum throughput reach to 1.8Tbps. HTTP/ command line remote and local management; SNMP management and SYSLOG management; Supports 110~240V AC dual power supply redundancy

Send email to us

Product Detail

Product Tags

1- Overviews

A full visual control of Data Acquisition device(6*40/100GE QSFP28 + 44*10/25GE SFP+ and 4*1/10G SFP+, total 54 ports)
A full Data Scheduling Management device(duplex Rx/Tx processing)
A full pre-processing and re-distribution device(bidirectional bandwidth 1.8Tbps)
Supported collection & reception of link data from different network element locations
Supported collection & reception of link data from different switch routing nodes
Supported raw packet collected, identified, analyzed, statistically summarized and marked
Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
Supported real-time packet capture analysis, data source identification
Supported P4 programmable chip solution, data compilation and action execution engine system. The hardware level support the recognition of new data types and strategy execution ability after data identification, can be customized for packet identification, quick add new function, new protocol matching. It has excellent scenario adaptation ability for the new network features. For example, VxLAN, MPLS, heterogeneous encapsulation nesting, 3-layer VLAN nesting, additional hardware level timestamp, etc.

2- Intelligent Traffic Processing Abilities

ASIC Chip Plus Multicore CPU
1.8Tbps intelligent traffic processing capabilities

100GE Acquisition
6*40/100GE QSFP28 + 44*10/25GE SFP+ and 4*1/10G SFP total 54 ports Rx/Tx duplex processing, up to 1.8Tbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Distribution
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to white list, blacklist or user’s predefined rules.

Data Filtering
Input data traffic can be accurately classified, and different data services can be discarded or forwarded to the output of multiple interfaces by whitelist or blacklist rules. Flexible combination of elements such as Ethernet Type, VLAN tag, TTL, IP seven-tuple, IP fragmentation, TCP flag identification, message characteristics, etc. to meet the deployment requirements of various network security equipment, protocol analysis, signaling analysis, traffic monitoring and so on

Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

Time Stamping
Supported to synchronize the NTP server to correct the time and write the message into the packet in the form of a relative time tag with a timestamp mark at the end of the frame, with the accuracy of nanoseconds

VLAN Tagged

VLAN Untagged

VLAN Replaced

Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.

Single fiber Transmission
Support single-fiber transmission at port rates of 10 G, 40 G, and 100 G to meet the single-fiber data receiving requirements of some back-end devices and reduce the input cost of fiber auxiliary materials when a large number of links need to be captured and distributed

40G Port Breakout
Support for breakout on 40G ports to be 4*10GE ports for specific access needs

Data Slicing
Supported policy-based slicing (64-1518 bytes optional) of the raw data, and the traffic output policy can be implemented based on user configuration

Tunneling Protocol Identify
Supported automatically identify various tunneling protocols such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel

Packet Capturing
Supported port-level, policy-level packet capture from source physical ports within filter of Five-Tuple field in real time

Packet Analysis
Supported the captured datagram analysis, including abnormal datagram analysis, stream recombination, transmission path analysis, and abnormal stream analysis

VxLAN, VLAN, MPLS, GTP, GRE, IPIP Header Stripping
Supported the VxLAN, VLAN, MPLS, GTP, GRE, IPIP header stripping to forward in the original data packet

Mylinking™ Network Visibility Platform
Supported Mylinking™ Matrix-SDN Visibility Control Platform Access

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

3- Typical Application Structures

3.1 Centralized Collection Replication/Aggregation Application(as following)

3.2 Unified Schedule Application(as following)

3.3 Data Packet Slicing Application(as following)

3.4 Data VLAN Tagged Application(as following)

4- Specifications

ML-NPB-5410+ Mylinking™ Network TAP/NPB Functional Parameters
Network Interface		100G(compatible with 40G)	6*QSFP28 slots
		10G(compatible with 25G)	44*SFP+ slots
		1G(compatible with 10G)	4*SFP+ slots
		Out band interface	1*10/100/1000M cooper
Deploy mode		Fiber Tap	Support
Deploy mode		Mirror Span	Support
System function	Traffic processing	Traffic replicating/aggregating/splitting	Support
		Load-balancing	Support
		Filter based on IP/protocol/port quintuple traffic identification	Support
		VLAN tag/untagged/replace	Support
		40G port breakout	Support
		Time stamping	Support
		Packet Header Stripping	VxLAN, VLAN, MPLS, GRE, GTP, IPIP, etc.
		Data Slicing	Support
		Tunnel protocol identification	Support
		Single fiber transmission	Support
		Ethernet package independence	Support
		Processing ability	1.8Tbps
	Management	CONSOLE MGT	Support
		IP/WEB MGT	Support
		SNMP MGT	Support
		TELNET/SSH MGT	Support
		SYSLOG Protocol	Support
		RADIUS or AAA Centralized authorization	Support
		User authentication	Authentication based on username and password
Electrical (1+1 Redundant Power System-RPS)		Rated power supply voltage	AC110~240V/DC-48V[Optional]
		Rated power frequency	AC-50HZ
		Rated input current	AC-3A / DC-10A
		Rated function power	Max 300W
Environment		Operating temperature	0－50℃
		Storage temperature	-20-70℃
		Working humidity	10%-95%, No condensation
User Configuration		Console Configuration	RS232 interface,115200,8,N,1
User Configuration		Password authentication	Support
Chassis Height		Rack Space (U)	1U 445mm44mm505mm