Mylinking™ Network Packet Broker(NPB) ML-NPB-6410+

210GE SFP+ plus 6440GE/100GE QSFP28, Max 6.4Tbps

Short Description:

Mylinking™ Network Packet Broker of ML-NPB-6410+ supports 64*100G/40G compatible QSFP28 interface up to 6.4Tbps traffic processing capability; Support L2-L7 Protocol Filtering function; The user defined input/output of each port, which is developed specifically for high-density and high-bandwidth Ethernet link collection requirements, realizing the whole process visual fine management of key node link data collection, centralized processing, unified scheduling, and on-demand distribution. Programmable P4 Chip Architecture supports flexible Message Encapsulation; Support matching function of inner/outer tunnel; Inner layer tunnel Hash load balancing to ensure session integrity. Support Header Stripping of VxLAN, VLAN, MPLS, GTP, GRE, IPIP, etc; Support WEB Graphical Interface Configuration; The above characteristics guarantee the linear speed processing performance.

Send email to us

Product Detail

Product Tags

1-overviews

A full visual control of Data Acquisition device(2U 64*40/100GE QSFP28 ports)
A full Data Scheduling Management device(64*100GE duplex Rx/Tx processing)
A full pre-processing and re-distribution device(bidirectional bandwidth 6.4Tbps)
Supported collection & reception of link data from different network element locations
Supported collection & reception of link data from different switch routing nodes
Supported raw packet collected, identified, analyzed, statistically summarized and marked
Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
Supported real-time packet capture analysis, data source identification
Supported P4 programmable chip solution, data compilation and action execution engine system. The hardware level support the recognition of new data types and strategy execution ability after data identification, can be customized for packet identification, quick add new function, new protocol matching. It has excellent scenario adaptation ability for the new network features. For example, VxLAN, MPLS, heterogeneous encapsulation nesting, 3-layer VLAN nesting, additional hardware level timestamp, etc.

2- Intelligent Traffic Processing Abilities

ASIC Chip Plus Multicore CPU
6.4Tbps intelligent traffic processing capabilities

100GE Traffic Capturing
64*40/100GE QSFP28 ports Rx/Tx duplex processing, up to 6.4Tbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Data Distribution
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to white list, blacklist or user’s predefined rules.

Data Filtering
Input data traffic can be accurately classified, and different data services can be discarded or forwarded to the output of multiple interfaces by whitelist or blacklist rules. Flexible combination of elements such as Ethernet Type, VLAN tag, TTL, IP seven-tuple, IP fragmentation, TCP flag identification, message characteristics, etc. to meet the deployment requirements of various network security equipment, protocol analysis, signaling analysis, traffic monitoring and so on

Load Balance
Based on L2 - L4 inside and outside the characteristics of the Hash algorithm of load balance, to make sure the bypass monitoring tools to receive session the integrity of data flow, and diversion port group in the link state changes can be flexible exit (Link DOWN) or add (Link UP), automatic redistribution flow shunt group, to ensure that the port output flow dynamic load balancing.

VLAN Tagged

VLAN Untagged

Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.

VLAN Replaced

100G & 40G Port Breakout
Support for breakout on 100G or 40G ports with 4*25GE or 4*10GE ports for specific access needs

Time Stamping
Supported to synchronize the NTP server to correct the time and write the message into the packet in the form of a relative time tag with a timestamp mark at the end of the frame, with the accuracy of nanoseconds

Data Slicing
Supported policy-based slicing (64-1518 bytes optional) of the raw data, and the traffic output policy can be implemented based on user configuration

Tunneling Protocol Identify
Supported automatically identify various tunneling protocols such as GTP / GRE / VxLAN / PPTP / IPIP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel

Packet Capturing
Supported port-level, policy-level packet capture from source physical ports within filter of Five-Tuple field in real time

Packet Analysis
Supported the captured datagram analysis, including abnormal datagram analysis, stream recombination, transmission path analysis, and abnormal stream analysis

VxLAN, VLAN, MPLS, GTP, GRE, IPIP Header Stripping
Supported the VxLAN, VLAN, MPLS, GTP, GRE, IPIP header stripping to forward in the original data packet

Mylinking™ Network Visibility Platform
Supported Mylinking™ Matrix-SDN Visibility Control Platform Access

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

3- Mylinking™ Network Packet Broker Typical Application Structures

3.1 Mylinking™ Network Packet Broker Centralized Collection Replication/Aggregation Application(as following)

3.2 Mylinking™ Network Packet Broker Unified Schedule Application(as following)

3.3 Mylinking™ Network Packet Broker Packet Slicing Application(as following)

3.4 Mylinking™ Network Packet Broker Data VLAN Tagged Application(as following)

4- Specifications

Mylinking™ Network Packet Broker TAP/NPB Functional Parameters
Network Interface		100G(compatible with 40G)	64*QSFP28 slots
		10G(compatible with 1G)	2*SFP+ slots
		Out band interface	1*10/100/1000M cooper
Deploy Mode		Fiber Tap	Support
Deploy Mode		Mirror Span	Support
System Function	Traffic Processing	Traffic replicating/aggregating/splitting	Support
		Load-balancing	Support
		Filter based on IP/protocol/port quintuple traffic identification	Support
		VLAN tag/untagged/replace	Support
		UDF Matching	Support
		Time stamping	Support
		Packet Header Stripping	VxLAN, VLAN, MPLS, GRE, GTP, IPIP etc.
		Data Slicing	Support
		Tunnel protocol identification	Support
		Single fiber transmission	Support
		Ethernet package independence	Support
		Processing ability	6.4Tbps
	Management	CONSOLE MGT	Support
		IP/WEB MGT	Support
		SNMP MGT	Support
		TELNET/SSH MGT	Support
		SYSLOG Protocol	Support
		RADIUS or AAA Centralized authorization	Support
		User authentication	Authentication based on username and password
Electrical (1+1 Redundant Power System-RPS)		Rated power supply voltage	AC110~240V/DC-48V[Optional]
		Rated power frequency	AC-50/60Hz
		Rated input current	AC-8A / DC-10A
		Rated function power	Max 830W
Environment		Operating temperature	0－45℃
		Storage temperature	-40-70℃
		Working humidity	10%-95%, No condensation
User Configuration		Console Configuration	RS232 interface,115200,8,N,1
User Configuration		Password authentication	Support
Chassis Height		Rack Space (U)	2U 440mm88mm597mm