Mylinking™ Network Tap ML-TAP-1410

12GE SFP plus 210GE SFP+, Max 32Gbps

Short Description:

Mylinking™ Network Tap of ML-TAP-1410 has up to 32Gbps processing capacity optical splitting or mirroring span access. It supports a maximum of 2 * 10 GIGABit SFP+ slots (compatible with 1 GIGABit) and 12 * 1 gigabit SFP slots, flexible support 10G and 1G single/multi-mode optical modules and 10 gigabit and 1 gigabit electrical modules. Supports LAN/WAN mode; Supports packet filtering and forwarding based on the source port, quintuple standard protocol domain, source/destination MAC address, IP fragment, transport layer port range, Ethernet type field, VLANID, MPLS label, and TCPFlag fixed offset feature. Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.

Send email to us

Product Detail

Product Tags

1- Overviews

A full visual control of Data Acquisition device(2*10GE SFP+ plus 12*GE SFP ports)
A full data network traffic scheduling management device(duplex Rx/Tx processing)
A full network traffic pre-processing and re-distribution device(bidirectional bandwidth 32Gbps)
Supported network traffic collection & reception of link data from different network element locations
Supported L2-L7 network packet filtering and matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.
Supported the UDF matching of any key field in the first 128 bytes of a packet. The user can customize the UDF offset value and key field length and content, and determine the traffic output policy according to the user configuration.
Supported realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP, etc protocol packaging

ML-TAP-1410

2- System Block Diagram

3- Operating Principle

4- Intelligent Network Traffic Processing Abilities

ASIC Chip Plus TCAM CPU
32Gbps intelligent network traffic processing capabilities

10GE Traffic Capture
10GE 2 ports, Max 2*10GE plus 12*GE ports Rx/Tx duplex processing, up to 32Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple traffic or packet Pre-processing

Network Traffic Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Network Traffic Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports

Network Traffic Distribution
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules.

Data/Packet Filtering
Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.

Load Balance
Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

UDF Matching
Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration

VLAN Tagged

VLAN Untagged

VLAN Replaced

Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.

MAC Address Replacement
Supported the replacement of the destination MAC address in the original data packet, which can be implemented according to the user's configuration

3G/4G Mobile Protocol Recognition/Classification
Supported to identify mobile network elements such as (Gb, Gn, IuPS, S1-MME, S1-U, X2-U, S3, S4, S5, S6a, S11, etc. interface). You can implement traffic output policies based on features such as GTPV1-C, GTPV1-U, GTPV2-C, SCTP, and S1-AP based on user configurations.

Ports Healthy Detection
Supported real-time detection of the service process health of the back-end monitoring and analysis equipment or tools connected to different output ports. When the service process fails, the faulty device will be automatically removed. After the faulty device is recovered, the system automatically returns to the load balancing group to ensure the reliability of multi-port load balancing.

VLAN, MPLS Untagged
Supported the VLAN, MPLS header stripping in the original data packet for output.

Tunneling Protocol Identify
Supported automatically identify various tunneling protocols, such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented based on the inner or outer layer of the tunnel

Unified Control Platform
Supported mylinking™ Visibility Control Platform Access

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

5- Mylinking™ Network Tap Typical Application Structures

5.1 Mylinking™ Network Tap GE to 10GE Data Aggregation Application(as following)

5.2 Mylinking™ Network Tap 1/10GE Data Distribution Application(as following)

5.3 Mylinking™ Network Tap Hybrid Network Traffic Capture Application (as following)

5.4 Mylinking™ Network Tap Customazition Traffic Monitoring Application(as following)

6- Specifications

Mylinking™ Network TapNPB/TAP Functional Parameters
Network Interface	GE ports	12*GE SFP slots
Network Interface	10GE ports	2*10GE SFP+ slots
Deployment mode	SPAN monitoring input	support
Deployment mode	In-line mode	support
	Total QTYs interface	14
	Traffic replication / aggregation / distribution	support
	Link QTYs supporting Mirror replication / aggregation	1 -> N link traffic replication (N <14)
		N-> 1 link traffic aggregation (N <14)
		G Group(M-> N Link) traffic replication and aggregation [G * (M + N) <14]
Functions	Distribution based on traffic identification	support
	Distribution based on IP / protocol / port Five tuple traffic identification	support
	Distribution strategy based on protocol header the key labeled traffic identifies	support
	Strategic distribution based on deep message content identification	support
	Support Ethernet encapsulation independence	support
	CONSOLE Network Management	support
	IP/WEB Network Management	support
	SNMP V1/V2C Network Management	support
	TELNET/SSH Network Management	support
	SYSLOG Protocol	support
	User authentication function	Password authentication based on user name
Electric(1+1 Redundant Power System-RPS)	Rated supply voltage	AC110-240V/DC-48V [Optional]
	Rated power frequency	AC-50HZ
	Rated input current	AC-3A / DC-10A
	Rated power function	150W(2401: 100W )
Environment	Operating Temperature	0－50℃
	Storage Temperature	-20-70℃
	Operating Humidity	10%-95%, Non-condensing
User Configuration	Console Configuration	RS232 Interface, 9600,8,N,1
User Configuration	Password authentication	support
Rack Height	Rack space (U)	1U 460mm45mm440mm

7- Order Information

ML-TAP-2401 mylinking™ Network Tap 24*GE SFP ports
ML-TAP-1410 mylinking™ Network Tap 12*GE SFP ports plus 2*10GE SFP+ ports
ML-TAP-2610 mylinking™ Network Tap 24*GE SFP ports plus 2*10GE SFP+ ports
ML-TAP-2810 mylinking™ Network Tap 24*GE SFP ports plus 4*10GE SFP+ ports

Previous: Mylinking™ Network Tap ML-TAP-1201B

Next: Mylinking™ Network Tap ML-TAP-1601B

Active Network Tap