Optical Transceiver Module
-
Mylinking™ Optical Transceiver Module SFP+ LC-MM 850nm 300m
ML-SFP+MX 10Gb/s SFP+ 850nm 300m LC Multi-Mode
Mylinking™ ML-SFP+MX RoHS Compliant 10Gb/s SFP+ 850nm 300m Optical Transceiver Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet over Multi-Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-SR/SW. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for Telecommunication and Datacom.
-
Mylinking™ Optical Transceiver Module SFP+ LC-SM 1310nm 10km
ML-SFP+SX 10Gb/s SFP+ 1310nm 10km LC Single-Mode
Mylinking™ ML-SFP+SX RoHS Compliant 10Gb/s SFP+ 1310nm 10km Optical Transceiver, Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW. The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecommunication.
-
Mylinking™ Copper Transceiver Module SFP 100m
ML-SFP-CX 1000BASE-T & 10/100/1000M RJ45 100m Copper SFP
The Mylinking™ Copper Small Form Pluggable (SFP) RoHS Compliant 1000M & 10/100/1000M Copper SFP Transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.
-
Mylinking™ Optical Transceiver Module SFP LC-MM 850nm 550m
ML-SFP-MX 1.25Gbps SFP 850nm 550m LC Multi-Mode
The Mylinking™ RoHS Compliant 1.25Gbps 850nm Optical Transceiver 550m Reach are high performance, cost effective modules supporting data-rate of 1.25Gbps and 550m transmission distance with MMF. The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
-
Mylinking™ Optical Transceiver Module SFP LC-SM 1310nm 10km
ML-SFP-SX 1.25Gb/s SFP 1310nm 10km LC Single-Mode
The Mylinking™ RoHS Compliant 1.25Gbps 1310nm Optical Transceiver 10km Reach are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 10km transmission distance with SMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
